科研成果

承担项目
学术论文
专利成果
成果展示
年度年报

学术论文

首页 >> 科研成果 >> 学术论文 >> 正文

2012年发表论文

发布者：周杰     日期：2013年04月07日 13:40   点击数：  

重点实验室2012 年度共发表学术论文120篇（其中SCI收录论文85篇）。

国外发表的论文

  1. Y.N. Pei, D. Xie,Y.X. Leng, L. Qian, H. Sun, N. Huang. Effects of screen-grid bias voltage on the microstructure and properties of the ultrahigh molecular weight polyethylene (UHMWPE) modified by oxygen plasma. Vacuum, 2012, 86(12): 1945-1951 (SCI)

  2. F.Q. Jiang, Q. Li, Y.X. Leng, N. Huang. Wear mechanisms during sliding of Ti64 balls against bare and HFCVD polycrystalline diamond coated WC-Co exchangeable inserts. IEEE Transactions on Plasma Science, 2012, 40(7): 1829-1836 (SCI)

  3. H.J. Liu, Y.X.Leng, J.L. Tang, S. Wang, D.Xie, H. Sun, N. Huang. Tribological performance of ultra-high-molecular-weight polyethylene sliding against DLC-coated and nitrogen ion implanted CoCrMo alloy measured in a hip joint simulator. Surface Coatingand Technology, 2012, 206(23): 4907-4914 (SCI)

  4. Zh.Y. Xu, Y.J. Zheng, H. Sun, Y.X. Leng,, N. Huang. Numerical and experimental study of residual stress of multilayer diamond-like carbon films prepared by filtered cathodic vacuum arc deposition. IEEE Transactions on Plasma Science, 2012, 40(9): 2261-2266 (SCI)

  5. D. Xie, G.J. Wan, M.F. Maitz, Y.F. Lei, N. Huang, H. Sun. Characterization and Mechanical Investigation of Ti-O2-x film Prepared by Plasma Immersion Ion Implantation and Deposition for Cardiovascular Stents Surface Modification. Nuclear Inst. and Methods in Physics Research B, 2012, 289: 91-96 (SCI)

  6. H.Q. Liu, Y.X. Leng, N. Huang. Corrosion resistance of Ti-O film modified 316L stainless steel coronary stents in vitro. Journal of Materials Engineering and Performance, 2012, 21(3): 424-428 (SCI)

  7. H.Q. Liu, Y.C. Zhao, S. Cheng, N. Huang, Y.X. Leng. Syntheses of novel chitosan derivative with excellent solubility, anticoagulation, and antibacterial property by chemical modification. Journal of Applied Polymer Science, 2012, 124(4): 2641-2648 (SCI)

  8. F.J. Jing, T.L. Yin, K. Yukimura, H. Suna, Y.X. Leng, N. Huang. Titanium film deposition by high-power impulse magnetron sputtering: Influence of pulse duration. Vacuum, 2012, 86: 2114-2119 (SCI/EI)

  9. Z.L. Yang, S. Zhou, L. Lu, X. Wang, J. Wang, N. Huang. Construction and hemocompatibility study of highly bioactive heparin-functionalized surface. Journal of Biomedical Materials Research: Part A, 2012, 100A: 3124-3133 (SCI)

  10. Z.L. Yang, Q.F. Tu, M.F. Maitz, S. Zhou, J. Wang, N. Huang. Direct thrombin inhibitor-bivalirudin functionalized plasma polymerized allylamine coating for improved biocompatibility of vascular devices. Biomaterials, 2012, 33: 7959-7971 (SCI)

  11. Z.L. Yang, Q.F. Tu, J. Wang, N. Huang. The role of heparin binding surface in the direction of endothelial and smooth muscle cell fate and re-endothelialization. Biomaterials, 2012, 33: 6615-6625 (SCI)

  12. Z.L. Yang, J. Wu, X. Wang, J. Wang, N. Huang. Inspired Chemistry for a Simple But Highly Effective Immobilization of Vascular Endothelial Growth Factor on Gallic Acid-Functionalized Plasma Polymerized Film. Plasma Processes and Polymers, 2012, 9: 718-725 (SCI)

  13. Z.L. Yang, J. Wang, X. Li, Q.F. Tu, H. Sun, N. Huang. Interaction of platelets, fibrinogen and endothelial cells with plasma deposited PEO-like films. Applied Surface Science, 2012, 258: 3378-3385 (SCI, EI)

  14. T.T. He, Z.L. Yang, R. Chen, J. Wang, Y.X. Leng, H. Sun, N. Huang. Enhanced endothelialization guided by fibronectin functionalized plasma polymerized acrylic acid film. Materials Science and Engineering: C, 2012, 32: 1025-1031 (SCI)

  15. J.L. Chen, J.J. Cao, J. Wang, M.F. Maitza, L.S. Guo, Y.C. Zhao, Q.L. Li, K.Q. Xiong, N. Huang. Biofunctionalization of titanium with PEG and anti-CD34 for hemocompatibility and stimulated endothelialization. Journal of Colloid and Interface Science, 2012, 368(1): 636-647 (SCI, EI)

  16. J.L. Chen, J. Wang, P.K. Qi, et al. Biocompatibility studies of Poly (ethylene glycol) modified titanium for cardiovascular devices. Journal of Bioactive and Compatible Polymers, 2012, 27(6): 565-584 (SCI)

  17. L. Lu, Q.L. Li, M.F. Maitz, J.L. Chen, N. Huang. Immobilization of the direct thrombin inhibitor-bivalirudin on 316L stainless steel via polydopamine and the resulting effects on hemocompatibility in vitro. Journal of Biomedical Materials Research Part A, 2012, 100(9): 2421-2430 (SCI)

  18. Y.J. Weng, F.J. Jing, J.Y. Chen, N. Huang. Construction of heparinylated multilayer films on Ti-O via streptavidin/biotin interaction. Applied Surface Science, 2012, 258(16): 5947-5954 (SCI, EI)

  19. Y.J. Weng, J.Y. Chen, Q.F. Tu, Q.L. Li, M. F. Maitz, N. Huang*,Biomimetic modification of metallic cardiovascular biomaterials: from function mimicking to endothelialization in vivo, Interface Focus, 2012, 2, 356-365 (SCI)

  20. G.J. Wan, A.A. Solovev, G.S. Huang, M.F. Maitz, N. Huang, Y.F.Mei. Dynamic curvature control of rolled-up metal nanomembranes activated by magnesium. Journal of Materials Chemistry, 2012, 22: 12983-12987 (SCI)

  21. S.H. Liu, T. Liu, J.Y. Chen, M. Maitz, C. Chen, N. Huang. Influence of a Layer-by-Layer Assembled multilayer of Anti-CD34 Antibody, VEGF and Heparin on the Endothelialization and Anticoagulation of Titanium Surface. Journal of Biomedical Materials Research: Part A, 2012, 27: 1145-1157 (SCI)黄楠

  22. C.H. Duan,J.X. Wang,S.B. Zhou,B. Feng,X. Lu,J. Weng. Study on controllable synthesis and phase transformation of calcium phosphate using a sol–gel approach. J. Sol-Gel Sci Technol, 2012, 63: 126-134 (SCI)

  23. X.Y. Lu, N.Y. Zhang, L. Wei, J.W. Wei, Q.Y. Deng, X. Lu, K. Duan, J. Weng. Fabrication of Carbon Nanotubes/Hydroxyapatite Nanocomposites via an In-Situ Process. Applied Surface Science, 2012, 262: 110-113（SCI）

  24. X.Y. Lu, T. Qiu, X.F. Wang, M. Zhang, X.L. Gao, R.X. Li, X. Lu, J. Weng. Preparation of foam-like carbon nanotubes/hydroxyapatite composite scaffolds with superparamagnetic properties. Applied Surface Science, 2012, 262: 227-230 (SCI）

  25. L. Xia, B. Feng, P.Z. Wang, S.Y. Ding, Z.Y. Liu, J. Zhou, R. Yu. In vitro and in vivo studies of surface structured implants for bone formation. International Journal of Nanomedicine, 2012, 7: 4873-4881 (SCI, EI)

  26. X.P. Fan, B. Feng, Z.Y. Liu, J. Tan, W. Zhi, L. Xiong, J.X. Wang, J. Weng. Fabrication of TiO2 nanotubes on porous titanium scaffold and biocompatibility evaluation in vitro and in vivo. Journal of Biomedical Materials Research Part A, 2012, 100A(12): 3422–3427 (SCI, EI)

  27. X.P. Fan, B. Feng, Y.L. Di, X. Lu, J. Wang, J. Weng. Graded porous titanium scaffolds fabricated using powder metallurgy technique. Powder Metallurgy and Metal Ceramics, 2012, 51(5-6): 153-159 (SCI, EI)

  28. X.P. Fan, B. Feng, Y.L. Di, X. Lu, K. Duan, J.X. Wang, J. Weng. Preparation of bioactive TiO film on porous titanium by micro-arc oxidation. Applied Surface Science, 2012, 258: 7584-7588 (SCI，EI)

  29. W.L. Gao, B. Feng, X. Lu, J.X. Wang, S.X. Qu, J. Weng. Characterization and cell behavior of titanium surfaces with PLL/DNA modification via a layer-by-layer technique. Journal of Biomedical Materials Research Part A, 2012, 100A: 2176-2185 (SCI, EI)

  30. J. Shi, B. Feng, X. Lu, J. Weng. Adsorption of bovine serum albumin onto titanium dioxide nanotube arrays. International Journal of Materials research, 2012, 103(7): 889-896 (SCI，EI)

  31. D. Yang，S.X. Qu, S.Z. Lin, J. Huang, R. Fu, Z.R. Zhou. Preliminary study on the effect of wear process on drug release of ALN-loaded UHMWPE. Applied Surface Science, 2012, 262: 207- 211 (SCI, EI)

  32. S.X. Qu, A.Q. Liu, X.M. Liu, Y.L. Bai, J. Weng. Study on drug release of and biological response to UHMWPE wear debris carrying estradiol. Applied Surface Science, 2012, 262: 168-175 (SCI, EI)

  33. D. Yang, S.X. Qu, J. Huang, Z.B. Cai, Z.R. Zhou . Characterization of Alendronate sodium-loaded UHMWPE for anti-osteolysis in orthopedic applications. Materials Science and Engineering C, 2012, 32: 83-91 (SCI, EI)

  34. T. Gong, W.B. Li, H.M. Chen, L. Wang, S.J. Shao, S.B. Zhou. Remotely actuated shape memory effect of electrospun composite nanofibers. Acta Biomaterialia 2012, 8: 1248-1259 (SCI)

  35. T. Chen, X. Guo, X. Liu, S. Shi, J. Wang, C.L. Shi, Z.Y. Qian, and S.B. Zhou. A Strategy in The Design of Micellar Shape for Cancer Therapy. Adv. Healthcare Mater, 2012, 1: 214-224 (SCI)

  36. C. Luo, L. Li, J.R. Li,G. Yang, S. Ding, W. Zhi, J. Weng and S.B. Zhou. Modulating cellular behaviors through surface nanoroughness. J. Mater. Chem, 2012, 22: 15654-15664 (SCI)

  37. C. Huang, Z.M. Tang, Y.B. Zhou, X.F. Zhou, Y. Jin, D. Li, Y. Yang, S.B. Zhou. Magnetic micelles as a potential platform for dual targeted drug delivery in cancer therapy. International Journal of Pharmaceutics, 2012, 429: 113-122 (SCI)

  38. X.J. Yu,L. Wang,M.T. Huang,T. Gong,W.B. Li,Y.L. Cao,D.J. Ji,P. Wang,J. WangandS.B. Zhou. A shape memory stent of poly(ε-caprolactone-co-dl-lactide) copolymer for potential treatment of esophageal stenosis.Journal of Materials Science: Materials in Medicine,2012, 23:581-589 (SCI)

  39. Y.W. Liu, L. Zhang, H.N. Li. S.L. Yan. J.S. Yu. J. Weng. X.H. Li. Electrospun fibrous mats on lithographically micropatterned collectors to control cellular behaviors. Langmuir, 2012, 28: 17134-17142 (SCI)

  40. X.M. Luo, G.S. Xu, H.X. Song, S.X. Yang, S.L. Yan, G.Q. Jia, X.H. Li. Promoted antitumor activities of acid-labile electrospun fibers loaded with hydroxycamptothecin via intratumoral implantation. Eur. J. Pharm. Biopharm, 2012, 82: 545-553 (SCI)

  41. Y.W. Liu, X.H. Li, B. Zou, J.G. Chen, Z.B. Cai, S.X. Qu, M.H. Zhu, L.M. Qian. Fretting behaviors of hot-pressed electrospun hydroxyapatite/poly(DL-lactide) fibrous composites as potential orthopaedic implants. Tribo. Int, 2012, 53: 124-133 (SCI)

  42. S.H. He, T. Xia, H. Wang, L. Wei, X.M. Luo, X.H. Li. Multiple releases of polyplexes of plasmids VEGF and bFGF from electrospun fibrous scaffolds towards regeneration of mature blood vessels. Acta Biomater, 2012, 8: 2659-2669 (SCI)

  43. X.J. Cai, X.H. Li, Y.W. Liu, G.N. Wu, Y.C. Zhao, F. Chen, Z.W. Gu. Galactose decorated acid-liable nanoparticles encapsulating quantum dots for enhanced cellular uptake and subcellular localization. Pharm. Res, 2012, 29: 2167-2179 (SCI)

  44. S.H. He, X.H. Li, Y. Yang, G.Q. Jia, J. Zou. Correlations of in vitro and in vivo degradation tests on electrospun poly-DL-lactide-poly(ethylene glycol) fibers. J. Appl. Polym. Sci., 2012, 125: 2207-2215 (SCI)

  45. B. Zou, X. Chen, W. Zhi, Y.W. Liu, W.G. Cui, S.C Hu, X.H. Li. Promoted healing of femoral defects with in situ grown fibrous composites of hydroxyapatite and poly(DL-lactide). J. Biomed. Mater. Res. Part A, 100A, 2012, 1407-1418 (SCI)

  46. B. Zou, Y.W. Liu, X.M. Luo, F. Chen, X.Q. Guo, X.H. Li*. Electrospun fibrous scaffolds with continuous gradations in mineral contents and biological cues for manipulating cellular behaviors. Acta Biomater., 2012, 8: 1576-1585 (SCI)

  47. X.M. Luo, C.Y. Xie, H. Wang, C.Y. Liu, S.L. Yan, X.H. Li. Antitumor activities of emulsion electrospun fibers with core loading of hydroxycamptothecin via intratumoral implantation. Int. J. Pharm., 2012, 425: 19-28 (SCI)

  48. Z. Chen, X.J. Cai, Y. Yang, G.N. Wu, Y.W. Liu, F. Chen, X.H. Li. Promoted transfection efficiency of pDNA polyplexes-loaded biodegradable microparticles containing acid-labile segments and galactose grafts. Pharm. Res., 2012, 29: 471-482 (SCI)

  49. Y. Yang, T. Xia, F. Chen, W. Wei, C.Y. Liu, S.H. He, X.H. Li. Electrospun fibers with plasmid bFGF polyplexes loadings promote skin wound healing in diabetic rats. Mol. Pharm., 2012, 9: 48-58 (SCI)

  50. L.L. Jiang, X. Lu, Y. Leng, S.X. Qu, B. Feng, J. Weng, Fumio Watari. Osteoblast behavior on TiO2 microgrooves prepared by soft-lithography and sol-gel methods. Materials Science and Engineering C, 2012, 32: 742-748 (SCI) 翁杰

  51. Y.L. Chen, Y.J. Cui, C.Y. Su, D.J. Zhou, C.H. Cheng, Y. Zhao. Magnetic properties of GdCoAsO. J Supercond Nov Magn., 2012, 25(1): 125-129 (SCI)

  52. X.S. Yang, L.Q. Yang, L. Lv, C.H. Cheng, Y. Zhao. Magnetic phase transition in La0.7Sr0.3MnO3/Ta2O5 ceramic composites. Ceramics International, 2012, 38: 2575-2578 (SCI)

  53. Z. Yu, C.p. Yan, T. Huang, W. Huang, Y. Yan, Y.x. Zhang, L. Liu, Y. Zhang, Y. Zhao.Influence of sputtering power on composition, structure and electrical properties of RF sputtered CuIn1-xGaxSe2 thin films. Applied surface science, 2012, 258: 5222-5229 (SCI)

  54. M. Pan, Z. Huang, H.F. Ma, Y. Zhao. Possible coexistence of SDW state with superconductivity in Ir doped SmOFeAs. Solid State Communications, 2012, 152: 458-461 (SCI)

  55. M. Pan, Z. Huang, H.F. Ma, Y. Zhao. First-principles study of lattice, magnetism and electronic structure for Fe-based superconductors: LaOFeAs, AFe2As2 (A=Sr,Ca), MFeAs(M=Li,Na) and FeSe. Rare Metal Materials and Engineering, 2012, 41(8): 1341-1345 (SCI）

  56. Z. Yu, C.P. Yan, Y. Yan, Y.X. Zhang, T. Huang, W. Huang, S.S. Li, L. Liu, Y. Zhang, Y. Zhao. Effect of annealing temperature on properties of RF sputtered Cu(In,Ga)Se2 thin films. Applied Surface Science, 2012, 258: 8527-8532 (SCI)

  57. W.T. Wang, Y. Zhao, X.F. Yang, W. Wei, M.H. Pu. Influence of pyrolysis atmosphere on YBa2Cu3O7-z superconducting film preparation by non-fluorine chemical solution deposition method. Materials Letters, 2012, 68: 429-431 (SCI)-赵勇

  58. S. Cui, X. Pang, S. Zhang, Y. Yu, H. Ma, X. Zhang. Unexpected Temperature-Dependent Single Chain Mechanics of Poly(N-isopropyl-acrylamide) in Water. Langmuir, 2012, 28(11): 5151-5157 (SCI)

  59. W. Li, Q. Pang, Y.S. Jiang, Z.H. Zhai, Z.R. Zhou. Study of physiological parameters and comfort sensations during friction contacts of the human Skin. Tribology Letters, 2012, 48: 293-304 (SCI)--摩擦

  60. X. Jian, M. Jiang, Z.W. Zhou, Q. Zeng, J. Lu, D.C. Wang, J.T. Zhu, J.H. Gou, Y. Wang, David Hui, M.L. Yang. Gas-induced formation of Cu nanoparticle as catalyst for high-purity straight and helical carbon nanofibers. ACS Nano, 2012, 6(10): 8611-8619 (SCI, EI)

  61. S.B. Zhu, W. Wei, X.N. Chen, M. Jiang, Z.W. Zhou. Hybrid structure of polyaniline/ZnO nanograss and its application in dye-sensitized solar cell with performance improvement. Journal of Solid State Chemistry, 2012, 190: 174-179 (SCI, EI)

  62. S.B. Zhu, M. Jiang, Y. Gou, X.N. Chen, Z.W. Zhou, J. Lu, David Hui. Synthesis and mechanism of polyaniline nanotubes with rectangular cross section via in-situ polymerization. Polymer for Advanced Technologies, 2012, 23: 796-802 (SCI, EI)

  63. J. Chen, Y.Y. Shi, J.H. Yang, N. Zhang, T. Huang, C. Chen, Y. Wang, Z.W. Zhou. A simple strategy to achieve very low percolation threshold via the selective distribution of carbon nanotubes at the interface of polymer blends. J. Mater. Chem, 2012, 22 (42): 22398-22404 (SCI)

  64. H.M. Chen, J.W. Chen, J. Chen, J.H. Yang, T. Huang, N. Zhang, Y. Wang. Effect of organic montmorillonite on cold crystallization and hydrolytic degradation of poly(L-lactide). Polym. Degrad. Stab, 2012, 97: 2273-2283 (SCI)

  65. F.M. Xiang, Y.Y. Shi, X.X. Li, T. Huang, C. Chen, Y. Peng, Y. Wang. Cocontinuous Morphology of Immiscible High Density Polyethylene/Polyamide 6 Blend Induced by Multiwalled Carbon Nanotubes Network. Eur. Polym. J, 2012, 48: 350-361 (SCI,EI)

  66. G. Yang, X.X. Li, J.W. Chen, J.H. Yang, T. Huang, X.R. Liu, Y. Wang. Crystallization behavior of isotactic polypropylene induced by competition action of β nucleating agent and high pressure. Colloid Polym. Sci, 2012, 290: 531-540 (SCI)

  67. Y.Y. Shi, Y.L. Li, F.M. Xiang, T. Huang, C. Chen, Y. Peng, Y. Wang. Carbon nanotubes induced microstructure and mechanical properties changes in cocontinuous poly(L-lactide)/ethylene-co-vinyl acetate blends. Polym. Adv. Technol, 2012, 23: 783-790 (SCI)

  68. F.M. Xiang, Y.H. Wang, Y.Y. Shi, T. Huang, C. Chen, Y. Peng, Y. Wang. Morphology and mechanical properties changes in compatibilized high density polyethylene/polyamide 6 nanocomposites induced by carbon nanotubes. Polym. Int, 2012, 61: 1334-1343 (SCI)

  69. X.X. Li, H.Y. Wu, J.W. Chen, J.H. Yang, T. Huang, N. Zhang, Y. Wang. Nonisothermal crystallization and multiple melting behaviors of β-nucleated impact-resistant polypropylene copolymer. J. Appl. Polym. Sci, 2012, 126: 1031-1043 (SCI)

  70. H.Y. Wu, X.X. Li, F.M. Xiang, T. Huang, Y.Y. Shi, Y. Wang. Microstructure evolution of isotactic polypropylene during annealing: Effect of poly(ethylene oxide). Chinese J Polym Sci, 2012, 30: 199-208 (SCI)

  71. X.X. Li, H.Y. Wu, G. Yang, X.R. Liu, S.M. Hong, Y. Wang. Phase Transition in β-nucleated Isotactic Polypropylene Induced by Combination of Annealing and High Pressure. J. Macromol. Sci. B, 2012, 51: 2377-2391 (SCI)

  72. D.K. Xi, D.P. Zhang, J.J. Tian, J. Lu, Z.W. Zhou, C.S. Yuan, X.R. Liu, S.R. Long, Y.J. Huang, R. Huang. Spherulitic growth of poly (ether ether ketone) crystallized at high pressure. Journal of Macromolecular Science, Part B: Physics, 2012, 51(3): 510-524 (SCI, EI)

  73. D.K. Xi, W.J. Huang, Z.P. Li, J. Lu, X.L. Chen, Z.W. Zhou. Fullerene-induced novel spherulitic structures of poly (ether ether ketone) at high pressure. Materials Letters, 2012, 81: 189-192 (SCI, EI)

  74. Z.H. Huang, S.C. Hu, N. Zhang, X.L. Chen, D. Chen, Q. Jin, X. Jian.Effect of volume ratio of acetonitrile to water on the morphology and property of polypyrrole prepared by chemical oxidation method. Polymer Engineering & Science, 2012, 52(7): 1600-1605 (SCI)

  75. J. Dai, X. M. Fan, H. Liu, J. Wang, H. R. Liu, and F. Z. Zhang. Fabrication and High Visible Light Photocatalytic Properties of Cu/Cu2O Nanocomposites by the One-Pot Solution-Phase Hydrothermal Method. Journal of Nanoscience and Nanotechnology, 2012, 12: 6412-6419 (SCI)

  76. D.Z. Wu, X.M. Fan, K. Tian, J. Dai, H.R. Liu. Fabrication and photocatalytic properties of Cu2S/T-ZnOw heterostructures via simple polyol process. Trans. Nonferrous Met. Soc. China, 2012, 22: 1620-1628 (SCI)

  77. J. Qin, X.L. Chen, J. Yu, T. Xie, Y.Z. Tian, Q. Lv, P. Xie. The structure and nonisothermal crystallization kinetics of HDPE nanocomposites filled with Mg2Al–LDH. Polymers and Polymer Composites, 2012, 20(8): 665-674 (SCI)

  78. Z.F. Shi, Y.J. Wang, C. Du, N. Huang, L. Wang, C. Y. Ning. Silicon nitride films for the protective functional coating: Blood compatibility and biomechanical property study. Journal of the Mechanical Behavior of Biomedical Materials, 2012, 16: 9-20 (SCI)

  79. Z.L. Yang, Q.F. Tu, Y. Zhu, R.F. Luo, X. Li, Y.C. Xie, M.F. Maitz, J. Wang, N. Huang. Mussel-inspired Coating of Polydopamine Directs Endothelial and Smooth Muscle Cell Fate for Re-endothelialization of Vascular Devices. Advanced Healthcare Materials, 2012, 1: 548-559

  80. L.L. Wu, G.J. Wan, F. Zhou, J. Yang, N. Huang. Finite Element Analysis of a Mechanical Heart Valve in Assembly. Advanced Materials Research, 2012, 569: 487-490 (EI)

  81. F. Zhou, Y.Y Cui, L.L. Wu, Y. Chen, J. Yang, N. Huang. TRIZ Based Tool Management Applied in Mechanical Heart Valve Engineering Systems. Advanced Materials Research, 2012, 569: 521-524 (EI)黄楠

  82. Q. Jiang, R. Yang, F.Y. Cao, P. Li, P. Pu, Z.W. He, Y. Zhao. Effects of the catalyst embedded conditions on the electrochemical properties of the grown in situ carbon nanotube chemically modified electrode. Procedia Engineering, 2012, 27: 1399-1404 ( EI )

  83. R. Yang, Q. Jiang, F.Y. Cao, L.B. Ren, Y.J. Hu, Q. Ma, Y. Zhao. Effects of the carbon nanotube length on its chemically modified electrodeelectrochemical performances, Procedia Engineering. 2012, 27: 1405-1410 ( EI )

  84. Q. Jiang, G.G. Fu, D.Y. Xie, S.Q. Jiang, Z.L. Chen, B. Huang, Y. Zhao. Preparation of carbon nanotube/polyaniline nanofiberbyelectrospinning. Procedia Engineering, 2012, 27: 72-76 ( EI )

  85. Y. Zhang, C.H. Cheng, X.S. Yang, C. Ke, Y. Zhao. Superconductivity and ferromagnetism in Mn-doped La0.84PrSr0.16CuO4 and Mn-doped LaPr0.88Ce0.12CuO4. Physics Procedia, 2012, 27: 36-39 ( EI )

  86. X.S. Yang, L.Q. Yang, C.H. Cheng, L. Lv, Y. Zhao. Magnetoresistance, electroresistance and nonlinear electrical behavior in nanopolycrystalline La2/3Sr1/3MnO3. Physics Procedia, 2012, 27: 96-99 ( EI )

  87. L.Q. Yang, X.S. Yang, C.H. Cheng, L. Lv, Y. Zhao. Structure and electrical properties in polymer bonded La0.7Sr0.3MnO3 composites. Physics Procedia, 2012, 27: 92-95 ( EI )赵勇

  88. J. Lu, R. Huang. Selective etching of pressure-crystallized bisphenol-A polycarbonate by dimethylacetamide at room temperature. Advanced Materials Research, 2012, 430-432: 66-69 (EI)

国内杂志论文

  1. 谢槟, 李贵才, 代璐, 杨苹. 黄楠,基于多巴胺自聚合及肝素固定改善钛的血液相容性. 高等学校化学学报, 2012, 33(1): 90-95 (SCI)

  2. 姜丽丽, 鲁雄. 石墨烯在太阳能电池中的应用. 无机材料学报, 2012, 27(11): 1129-1137,2012 (SCI)

  3. 王蓉, 史占花, 蔡芳共, 杨峰, 贾永芳, 黎颖, 程翠华, 赵勇. ZnO/Cu2O异质结中深能级表面光伏特性研究. 高等学校化学学报, 2012, 33(4): 768-771 (SCI)

  4. 廖鑫, 杨峰, 蒲明华, 赵勇. PbS量子点/ZnO纳米片复合膜的制备及其光电化学性能研究. 无机材料学报, 2012, 27(1): 59-63 (SCI)

  5. 史占花, 王蓉, 杨峰, 贾永芳, 黎颖, 程翠华, 赵勇. 钛箔上生长-Fe2O3纳米氧化膜及其光电性质研究. 无机化学学报, 2012, 28(7): 1338-1342 (SCI)

  6. 吴德智, 范希梅, 代佳, 刘花蓉, 刘红, 张冯章. 硫化亚铜/四针状氧化锌晶须纳米复合材料的制备及其光催化性能. 催化学报, 2012, 33(5): 802-807 (SCI)

  7. 陈晓浪, 徐阳, 孙志丹, 张志斌, 胡书春. Shaw Ling Hsu. 拉伸温度对α′-型聚乳酸结构与性能的影响. 化学学报, 2012, 70(6): 775-782 ( SCI)

  8. 谢东, 冷永祥, 黄楠. 表征高分子材料表面力学性能的新概念—“表面积/面积比”. 高分子材料科学与工程, 2012, 27(7): 167-170 (EI)

  9. 刘艳秋, 黄楠, 邹远文, 黄学进, 李晋川, 樊瑜波. 一种血管生物反应器相关参数的量化分析. 西南交通大学学报, 2012, 47(1): 139-143 (EI)

  10. 胡珂, 刘涛, 刘诗卉, 陈俊英, 黄楠. 钛材料表面固定多聚赖氨酸-肝素纳米颗粒以改善血液相容性的研究, 功能材料, 2012, 43(19), 2685-2693 (EI)

  11. 张慧婷, 周超, 罗丽萍, 李遂焰, 陈俊英, 孙鸿, 黄楠. 利用MicroBCA和QCM对钛薄膜表面固定的纤连蛋白进行量化研究与对比. 功能材料, 2012, 43(13): 1726-1729 (EI)

  12. 张琨, 邓坤, 李敬安, 王雪, 陈俊英, 黄楠. Ti表面构建IV型胶原/肝素生物层提高细胞相容性的研究. 功能材料, 2012, 43(24): 3368-3376 (EI)

  13. 袁江, 谭红梅, 郭洪燕, 徐立, 汪建新. N-琥珀酰壳聚糖/氧化硫酸软骨素水凝胶的制，Chemical Propellants & Polymeric Materials, 2012, 10 (6): 66-69 ( )

  14. 闫浩然，汪建新，张俊良, 微波加热剥离法制备石墨烯, Chemical Propellants & Polymeric Materials, 2012, 10 (3), 47-519 ( )

  15. 黎恢永, 汪建新, 王少伟, 吴培作. 界面法制备纳米结构 ZnO薄膜. 纳米科技, 2012, 9(2): 31-37 ( )

  16. 闫浩然, 汪建新, 李辉, 陈迪. 溶胶-凝胶微波辅助水热处理合成纳米TiO2. 纳米科技, 2012, 9(1): 30-34 ( )

  17. 谭红梅, 刘 霞, 汪建新, 王莹莹. 一锅溶剂热法合成 SnO2纳米球和纳米颗粒. 纳米科技, 2012, 9(2): 38-43 ( )

  18. 姜丽丽, 鲁雄. 石墨烯制备方法及研究进展.功能材料, 2012, 23(9): 3185-3189 ( EI )

  19. 罗锦洁, 冯波, 郭振永, 范兴平, 屈树新. 钛表面不同厚度氧化钛纳米管层的摩擦磨损行为. 中国表面工程. 2012, 25(4), 94-99 ---翁杰

  20. 黄涛, 闫勇, 黄稳, 张艳霞, 晏传鹏, 刘连, 张勇, 赵勇, 余洲. 直流溅射工艺参数对Mo薄膜结构及电性能的影响. 功能材料, 2012, 4: 499-503 (EI)

  21. 黄稳, 余洲, 刘连, 张勇, 黄涛, 闫勇, 赵勇. 射频溅射工艺参数对AZO薄膜结构和性能的影响. 功能材料, 2012, 12: 1553-1555 (EI)

  22. 黄稳, 余洲, 张勇, 刘连, 黄涛, 闫勇, 赵勇. AZO薄膜制备工艺及其性能研究. 材料导报, 2012, 26: 35-39 ( )

  23. 闫勇, 张艳霞, 李莎莎, 晏传鹏, 刘连, 张勇, 赵勇, 余洲. 非晶CIGS前驱膜无硒退火的相变历程. 功能材料, 2012, 43: 2902-2905 (EI)

  24. 张欣, 王文涛, 张敏, 张勇, 张酣, 雷鸣, 赵勇. 高分子辅助化学溶液沉积法制备高温超导涂层导体BaZrO3(BZO)缓冲层的研究. 功能材料, 2012, 14(43): 1854-1857 ( EI )

  25. 杨立芹, 羊新胜, 吕莉, 赵勇. 粘结型La0.8Sr0.2MnO3/Sn复合材料电输运与磁电阻特征. 磁性材料及器件, 2012, 4: 31-34 --赵勇

  26. 李炜, 蒋玉石, 庞强, 翟正绘, 周仲荣. 不同性别人体皮肤摩擦不舒适度感知功能的研究. 摩擦学学报, 2012, 32(3): 227-232 (EI)

  27. 翟正绘, 李炜, 庞强. 去角质化妆品对皮肤摩擦性能的影响研究. 摩擦学学报, 2012，32(6): 606-611 (EI)

  28. 朱俊廷, 孟繁臣, 周祚万. 在轴对称径向Coulomb势场中单电子Schröding方程的解析解. 四川大学学报(自然科学版), 2012, 49(6): 1280-1284 (EI)

  29. 朱俊廷, 古公兵, 周祚万. 常压水热法制备纳米多界面结构氧化锌及其电磁波损耗特性. 功能材料, 2012, 6(43): 813-816 (EI)

  30. 朱俊廷, 简贤, 王定川, 周祚万. 螺旋碳纤维的顺磁响应. 材料导报, 2012, 26(8): 17-19

  31. 张楠, 陈海路, 胡书春, 仇迎, 金佥, 黄真浩, 田馨, 刘欢. 化学镀镍碳纳米管的电磁学性能与吸波性能研究. 化工新型材料, 2012, 40(5): 81-83

  32. 徐阳, 孙志丹, 陈晓浪, 郭刚，张志斌, 胡书春. 结晶温度对左旋聚乳酸的晶体改性和晶体形貌的影响. 功能材料, 2012, 43(16): 2138-2140 (EI)

Copyright © 2017

西南交通大学材料先进技术教育部重点实验室

四川省成都市西南交通大学

材料先进技术教育部重点实验室

2012年发表论文

2013年04月07日 13:40 202次浏览

重点实验室2012 年度共发表学术论文120篇（其中SCI收录论文85篇）。

国外发表的论文

  1. Y.N. Pei, D. Xie,Y.X. Leng, L. Qian, H. Sun, N. Huang. Effects of screen-grid bias voltage on the microstructure and properties of the ultrahigh molecular weight polyethylene (UHMWPE) modified by oxygen plasma. Vacuum, 2012, 86(12): 1945-1951 (SCI)

  2. F.Q. Jiang, Q. Li, Y.X. Leng, N. Huang. Wear mechanisms during sliding of Ti64 balls against bare and HFCVD polycrystalline diamond coated WC-Co exchangeable inserts. IEEE Transactions on Plasma Science, 2012, 40(7): 1829-1836 (SCI)

  3. H.J. Liu, Y.X.Leng, J.L. Tang, S. Wang, D.Xie, H. Sun, N. Huang. Tribological performance of ultra-high-molecular-weight polyethylene sliding against DLC-coated and nitrogen ion implanted CoCrMo alloy measured in a hip joint simulator. Surface Coatingand Technology, 2012, 206(23): 4907-4914 (SCI)

  4. Zh.Y. Xu, Y.J. Zheng, H. Sun, Y.X. Leng,, N. Huang. Numerical and experimental study of residual stress of multilayer diamond-like carbon films prepared by filtered cathodic vacuum arc deposition. IEEE Transactions on Plasma Science, 2012, 40(9): 2261-2266 (SCI)

  5. D. Xie, G.J. Wan, M.F. Maitz, Y.F. Lei, N. Huang, H. Sun. Characterization and Mechanical Investigation of Ti-O2-x film Prepared by Plasma Immersion Ion Implantation and Deposition for Cardiovascular Stents Surface Modification. Nuclear Inst. and Methods in Physics Research B, 2012, 289: 91-96 (SCI)

  6. H.Q. Liu, Y.X. Leng, N. Huang. Corrosion resistance of Ti-O film modified 316L stainless steel coronary stents in vitro. Journal of Materials Engineering and Performance, 2012, 21(3): 424-428 (SCI)

  7. H.Q. Liu, Y.C. Zhao, S. Cheng, N. Huang, Y.X. Leng. Syntheses of novel chitosan derivative with excellent solubility, anticoagulation, and antibacterial property by chemical modification. Journal of Applied Polymer Science, 2012, 124(4): 2641-2648 (SCI)

  8. F.J. Jing, T.L. Yin, K. Yukimura, H. Suna, Y.X. Leng, N. Huang. Titanium film deposition by high-power impulse magnetron sputtering: Influence of pulse duration. Vacuum, 2012, 86: 2114-2119 (SCI/EI)

  9. Z.L. Yang, S. Zhou, L. Lu, X. Wang, J. Wang, N. Huang. Construction and hemocompatibility study of highly bioactive heparin-functionalized surface. Journal of Biomedical Materials Research: Part A, 2012, 100A: 3124-3133 (SCI)

  10. Z.L. Yang, Q.F. Tu, M.F. Maitz, S. Zhou, J. Wang, N. Huang. Direct thrombin inhibitor-bivalirudin functionalized plasma polymerized allylamine coating for improved biocompatibility of vascular devices. Biomaterials, 2012, 33: 7959-7971 (SCI)

  11. Z.L. Yang, Q.F. Tu, J. Wang, N. Huang. The role of heparin binding surface in the direction of endothelial and smooth muscle cell fate and re-endothelialization. Biomaterials, 2012, 33: 6615-6625 (SCI)

  12. Z.L. Yang, J. Wu, X. Wang, J. Wang, N. Huang. Inspired Chemistry for a Simple But Highly Effective Immobilization of Vascular Endothelial Growth Factor on Gallic Acid-Functionalized Plasma Polymerized Film. Plasma Processes and Polymers, 2012, 9: 718-725 (SCI)

  13. Z.L. Yang, J. Wang, X. Li, Q.F. Tu, H. Sun, N. Huang. Interaction of platelets, fibrinogen and endothelial cells with plasma deposited PEO-like films. Applied Surface Science, 2012, 258: 3378-3385 (SCI, EI)

  14. T.T. He, Z.L. Yang, R. Chen, J. Wang, Y.X. Leng, H. Sun, N. Huang. Enhanced endothelialization guided by fibronectin functionalized plasma polymerized acrylic acid film. Materials Science and Engineering: C, 2012, 32: 1025-1031 (SCI)

  15. J.L. Chen, J.J. Cao, J. Wang, M.F. Maitza, L.S. Guo, Y.C. Zhao, Q.L. Li, K.Q. Xiong, N. Huang. Biofunctionalization of titanium with PEG and anti-CD34 for hemocompatibility and stimulated endothelialization. Journal of Colloid and Interface Science, 2012, 368(1): 636-647 (SCI, EI)

  16. J.L. Chen, J. Wang, P.K. Qi, et al. Biocompatibility studies of Poly (ethylene glycol) modified titanium for cardiovascular devices. Journal of Bioactive and Compatible Polymers, 2012, 27(6): 565-584 (SCI)

  17. L. Lu, Q.L. Li, M.F. Maitz, J.L. Chen, N. Huang. Immobilization of the direct thrombin inhibitor-bivalirudin on 316L stainless steel via polydopamine and the resulting effects on hemocompatibility in vitro. Journal of Biomedical Materials Research Part A, 2012, 100(9): 2421-2430 (SCI)

  18. Y.J. Weng, F.J. Jing, J.Y. Chen, N. Huang. Construction of heparinylated multilayer films on Ti-O via streptavidin/biotin interaction. Applied Surface Science, 2012, 258(16): 5947-5954 (SCI, EI)

  19. Y.J. Weng, J.Y. Chen, Q.F. Tu, Q.L. Li, M. F. Maitz, N. Huang*,Biomimetic modification of metallic cardiovascular biomaterials: from function mimicking to endothelialization in vivo, Interface Focus, 2012, 2, 356-365 (SCI)

  20. G.J. Wan, A.A. Solovev, G.S. Huang, M.F. Maitz, N. Huang, Y.F.Mei. Dynamic curvature control of rolled-up metal nanomembranes activated by magnesium. Journal of Materials Chemistry, 2012, 22: 12983-12987 (SCI)

  21. S.H. Liu, T. Liu, J.Y. Chen, M. Maitz, C. Chen, N. Huang. Influence of a Layer-by-Layer Assembled multilayer of Anti-CD34 Antibody, VEGF and Heparin on the Endothelialization and Anticoagulation of Titanium Surface. Journal of Biomedical Materials Research: Part A, 2012, 27: 1145-1157 (SCI)黄楠

  22. C.H. Duan,J.X. Wang,S.B. Zhou,B. Feng,X. Lu,J. Weng. Study on controllable synthesis and phase transformation of calcium phosphate using a sol–gel approach. J. Sol-Gel Sci Technol, 2012, 63: 126-134 (SCI)

  23. X.Y. Lu, N.Y. Zhang, L. Wei, J.W. Wei, Q.Y. Deng, X. Lu, K. Duan, J. Weng. Fabrication of Carbon Nanotubes/Hydroxyapatite Nanocomposites via an In-Situ Process. Applied Surface Science, 2012, 262: 110-113（SCI）

  24. X.Y. Lu, T. Qiu, X.F. Wang, M. Zhang, X.L. Gao, R.X. Li, X. Lu, J. Weng. Preparation of foam-like carbon nanotubes/hydroxyapatite composite scaffolds with superparamagnetic properties. Applied Surface Science, 2012, 262: 227-230 (SCI）

  25. L. Xia, B. Feng, P.Z. Wang, S.Y. Ding, Z.Y. Liu, J. Zhou, R. Yu. In vitro and in vivo studies of surface structured implants for bone formation. International Journal of Nanomedicine, 2012, 7: 4873-4881 (SCI, EI)

  26. X.P. Fan, B. Feng, Z.Y. Liu, J. Tan, W. Zhi, L. Xiong, J.X. Wang, J. Weng. Fabrication of TiO2 nanotubes on porous titanium scaffold and biocompatibility evaluation in vitro and in vivo. Journal of Biomedical Materials Research Part A, 2012, 100A(12): 3422–3427 (SCI, EI)

  27. X.P. Fan, B. Feng, Y.L. Di, X. Lu, J. Wang, J. Weng. Graded porous titanium scaffolds fabricated using powder metallurgy technique. Powder Metallurgy and Metal Ceramics, 2012, 51(5-6): 153-159 (SCI, EI)

  28. X.P. Fan, B. Feng, Y.L. Di, X. Lu, K. Duan, J.X. Wang, J. Weng. Preparation of bioactive TiO film on porous titanium by micro-arc oxidation. Applied Surface Science, 2012, 258: 7584-7588 (SCI，EI)

  29. W.L. Gao, B. Feng, X. Lu, J.X. Wang, S.X. Qu, J. Weng. Characterization and cell behavior of titanium surfaces with PLL/DNA modification via a layer-by-layer technique. Journal of Biomedical Materials Research Part A, 2012, 100A: 2176-2185 (SCI, EI)

  30. J. Shi, B. Feng, X. Lu, J. Weng. Adsorption of bovine serum albumin onto titanium dioxide nanotube arrays. International Journal of Materials research, 2012, 103(7): 889-896 (SCI，EI)

  31. D. Yang，S.X. Qu, S.Z. Lin, J. Huang, R. Fu, Z.R. Zhou. Preliminary study on the effect of wear process on drug release of ALN-loaded UHMWPE. Applied Surface Science, 2012, 262: 207- 211 (SCI, EI)

  32. S.X. Qu, A.Q. Liu, X.M. Liu, Y.L. Bai, J. Weng. Study on drug release of and biological response to UHMWPE wear debris carrying estradiol. Applied Surface Science, 2012, 262: 168-175 (SCI, EI)

  33. D. Yang, S.X. Qu, J. Huang, Z.B. Cai, Z.R. Zhou . Characterization of Alendronate sodium-loaded UHMWPE for anti-osteolysis in orthopedic applications. Materials Science and Engineering C, 2012, 32: 83-91 (SCI, EI)

  34. T. Gong, W.B. Li, H.M. Chen, L. Wang, S.J. Shao, S.B. Zhou. Remotely actuated shape memory effect of electrospun composite nanofibers. Acta Biomaterialia 2012, 8: 1248-1259 (SCI)

  35. T. Chen, X. Guo, X. Liu, S. Shi, J. Wang, C.L. Shi, Z.Y. Qian, and S.B. Zhou. A Strategy in The Design of Micellar Shape for Cancer Therapy. Adv. Healthcare Mater, 2012, 1: 214-224 (SCI)

  36. C. Luo, L. Li, J.R. Li,G. Yang, S. Ding, W. Zhi, J. Weng and S.B. Zhou. Modulating cellular behaviors through surface nanoroughness. J. Mater. Chem, 2012, 22: 15654-15664 (SCI)

  37. C. Huang, Z.M. Tang, Y.B. Zhou, X.F. Zhou, Y. Jin, D. Li, Y. Yang, S.B. Zhou. Magnetic micelles as a potential platform for dual targeted drug delivery in cancer therapy. International Journal of Pharmaceutics, 2012, 429: 113-122 (SCI)

  38. X.J. Yu,L. Wang,M.T. Huang,T. Gong,W.B. Li,Y.L. Cao,D.J. Ji,P. Wang,J. WangandS.B. Zhou. A shape memory stent of poly(ε-caprolactone-co-dl-lactide) copolymer for potential treatment of esophageal stenosis.Journal of Materials Science: Materials in Medicine,2012, 23:581-589 (SCI)

  39. Y.W. Liu, L. Zhang, H.N. Li. S.L. Yan. J.S. Yu. J. Weng. X.H. Li. Electrospun fibrous mats on lithographically micropatterned collectors to control cellular behaviors. Langmuir, 2012, 28: 17134-17142 (SCI)

  40. X.M. Luo, G.S. Xu, H.X. Song, S.X. Yang, S.L. Yan, G.Q. Jia, X.H. Li. Promoted antitumor activities of acid-labile electrospun fibers loaded with hydroxycamptothecin via intratumoral implantation. Eur. J. Pharm. Biopharm, 2012, 82: 545-553 (SCI)

  41. Y.W. Liu, X.H. Li, B. Zou, J.G. Chen, Z.B. Cai, S.X. Qu, M.H. Zhu, L.M. Qian. Fretting behaviors of hot-pressed electrospun hydroxyapatite/poly(DL-lactide) fibrous composites as potential orthopaedic implants. Tribo. Int, 2012, 53: 124-133 (SCI)

  42. S.H. He, T. Xia, H. Wang, L. Wei, X.M. Luo, X.H. Li. Multiple releases of polyplexes of plasmids VEGF and bFGF from electrospun fibrous scaffolds towards regeneration of mature blood vessels. Acta Biomater, 2012, 8: 2659-2669 (SCI)

  43. X.J. Cai, X.H. Li, Y.W. Liu, G.N. Wu, Y.C. Zhao, F. Chen, Z.W. Gu. Galactose decorated acid-liable nanoparticles encapsulating quantum dots for enhanced cellular uptake and subcellular localization. Pharm. Res, 2012, 29: 2167-2179 (SCI)

  44. S.H. He, X.H. Li, Y. Yang, G.Q. Jia, J. Zou. Correlations of in vitro and in vivo degradation tests on electrospun poly-DL-lactide-poly(ethylene glycol) fibers. J. Appl. Polym. Sci., 2012, 125: 2207-2215 (SCI)

  45. B. Zou, X. Chen, W. Zhi, Y.W. Liu, W.G. Cui, S.C Hu, X.H. Li. Promoted healing of femoral defects with in situ grown fibrous composites of hydroxyapatite and poly(DL-lactide). J. Biomed. Mater. Res. Part A, 100A, 2012, 1407-1418 (SCI)

  46. B. Zou, Y.W. Liu, X.M. Luo, F. Chen, X.Q. Guo, X.H. Li*. Electrospun fibrous scaffolds with continuous gradations in mineral contents and biological cues for manipulating cellular behaviors. Acta Biomater., 2012, 8: 1576-1585 (SCI)

  47. X.M. Luo, C.Y. Xie, H. Wang, C.Y. Liu, S.L. Yan, X.H. Li. Antitumor activities of emulsion electrospun fibers with core loading of hydroxycamptothecin via intratumoral implantation. Int. J. Pharm., 2012, 425: 19-28 (SCI)

  48. Z. Chen, X.J. Cai, Y. Yang, G.N. Wu, Y.W. Liu, F. Chen, X.H. Li. Promoted transfection efficiency of pDNA polyplexes-loaded biodegradable microparticles containing acid-labile segments and galactose grafts. Pharm. Res., 2012, 29: 471-482 (SCI)

  49. Y. Yang, T. Xia, F. Chen, W. Wei, C.Y. Liu, S.H. He, X.H. Li. Electrospun fibers with plasmid bFGF polyplexes loadings promote skin wound healing in diabetic rats. Mol. Pharm., 2012, 9: 48-58 (SCI)

  50. L.L. Jiang, X. Lu, Y. Leng, S.X. Qu, B. Feng, J. Weng, Fumio Watari. Osteoblast behavior on TiO2 microgrooves prepared by soft-lithography and sol-gel methods. Materials Science and Engineering C, 2012, 32: 742-748 (SCI) 翁杰

  51. Y.L. Chen, Y.J. Cui, C.Y. Su, D.J. Zhou, C.H. Cheng, Y. Zhao. Magnetic properties of GdCoAsO. J Supercond Nov Magn., 2012, 25(1): 125-129 (SCI)

  52. X.S. Yang, L.Q. Yang, L. Lv, C.H. Cheng, Y. Zhao. Magnetic phase transition in La0.7Sr0.3MnO3/Ta2O5 ceramic composites. Ceramics International, 2012, 38: 2575-2578 (SCI)

  53. Z. Yu, C.p. Yan, T. Huang, W. Huang, Y. Yan, Y.x. Zhang, L. Liu, Y. Zhang, Y. Zhao.Influence of sputtering power on composition, structure and electrical properties of RF sputtered CuIn1-xGaxSe2 thin films. Applied surface science, 2012, 258: 5222-5229 (SCI)

  54. M. Pan, Z. Huang, H.F. Ma, Y. Zhao. Possible coexistence of SDW state with superconductivity in Ir doped SmOFeAs. Solid State Communications, 2012, 152: 458-461 (SCI)

  55. M. Pan, Z. Huang, H.F. Ma, Y. Zhao. First-principles study of lattice, magnetism and electronic structure for Fe-based superconductors: LaOFeAs, AFe2As2 (A=Sr,Ca), MFeAs(M=Li,Na) and FeSe. Rare Metal Materials and Engineering, 2012, 41(8): 1341-1345 (SCI）

  56. Z. Yu, C.P. Yan, Y. Yan, Y.X. Zhang, T. Huang, W. Huang, S.S. Li, L. Liu, Y. Zhang, Y. Zhao. Effect of annealing temperature on properties of RF sputtered Cu(In,Ga)Se2 thin films. Applied Surface Science, 2012, 258: 8527-8532 (SCI)

  57. W.T. Wang, Y. Zhao, X.F. Yang, W. Wei, M.H. Pu. Influence of pyrolysis atmosphere on YBa2Cu3O7-z superconducting film preparation by non-fluorine chemical solution deposition method. Materials Letters, 2012, 68: 429-431 (SCI)-赵勇

  58. S. Cui, X. Pang, S. Zhang, Y. Yu, H. Ma, X. Zhang. Unexpected Temperature-Dependent Single Chain Mechanics of Poly(N-isopropyl-acrylamide) in Water. Langmuir, 2012, 28(11): 5151-5157 (SCI)

  59. W. Li, Q. Pang, Y.S. Jiang, Z.H. Zhai, Z.R. Zhou. Study of physiological parameters and comfort sensations during friction contacts of the human Skin. Tribology Letters, 2012, 48: 293-304 (SCI)--摩擦

  60. X. Jian, M. Jiang, Z.W. Zhou, Q. Zeng, J. Lu, D.C. Wang, J.T. Zhu, J.H. Gou, Y. Wang, David Hui, M.L. Yang. Gas-induced formation of Cu nanoparticle as catalyst for high-purity straight and helical carbon nanofibers. ACS Nano, 2012, 6(10): 8611-8619 (SCI, EI)

  61. S.B. Zhu, W. Wei, X.N. Chen, M. Jiang, Z.W. Zhou. Hybrid structure of polyaniline/ZnO nanograss and its application in dye-sensitized solar cell with performance improvement. Journal of Solid State Chemistry, 2012, 190: 174-179 (SCI, EI)

  62. S.B. Zhu, M. Jiang, Y. Gou, X.N. Chen, Z.W. Zhou, J. Lu, David Hui. Synthesis and mechanism of polyaniline nanotubes with rectangular cross section via in-situ polymerization. Polymer for Advanced Technologies, 2012, 23: 796-802 (SCI, EI)

  63. J. Chen, Y.Y. Shi, J.H. Yang, N. Zhang, T. Huang, C. Chen, Y. Wang, Z.W. Zhou. A simple strategy to achieve very low percolation threshold via the selective distribution of carbon nanotubes at the interface of polymer blends. J. Mater. Chem, 2012, 22 (42): 22398-22404 (SCI)

  64. H.M. Chen, J.W. Chen, J. Chen, J.H. Yang, T. Huang, N. Zhang, Y. Wang. Effect of organic montmorillonite on cold crystallization and hydrolytic degradation of poly(L-lactide). Polym. Degrad. Stab, 2012, 97: 2273-2283 (SCI)

  65. F.M. Xiang, Y.Y. Shi, X.X. Li, T. Huang, C. Chen, Y. Peng, Y. Wang. Cocontinuous Morphology of Immiscible High Density Polyethylene/Polyamide 6 Blend Induced by Multiwalled Carbon Nanotubes Network. Eur. Polym. J, 2012, 48: 350-361 (SCI,EI)

  66. G. Yang, X.X. Li, J.W. Chen, J.H. Yang, T. Huang, X.R. Liu, Y. Wang. Crystallization behavior of isotactic polypropylene induced by competition action of β nucleating agent and high pressure. Colloid Polym. Sci, 2012, 290: 531-540 (SCI)

  67. Y.Y. Shi, Y.L. Li, F.M. Xiang, T. Huang, C. Chen, Y. Peng, Y. Wang. Carbon nanotubes induced microstructure and mechanical properties changes in cocontinuous poly(L-lactide)/ethylene-co-vinyl acetate blends. Polym. Adv. Technol, 2012, 23: 783-790 (SCI)

  68. F.M. Xiang, Y.H. Wang, Y.Y. Shi, T. Huang, C. Chen, Y. Peng, Y. Wang. Morphology and mechanical properties changes in compatibilized high density polyethylene/polyamide 6 nanocomposites induced by carbon nanotubes. Polym. Int, 2012, 61: 1334-1343 (SCI)

  69. X.X. Li, H.Y. Wu, J.W. Chen, J.H. Yang, T. Huang, N. Zhang, Y. Wang. Nonisothermal crystallization and multiple melting behaviors of β-nucleated impact-resistant polypropylene copolymer. J. Appl. Polym. Sci, 2012, 126: 1031-1043 (SCI)

  70. H.Y. Wu, X.X. Li, F.M. Xiang, T. Huang, Y.Y. Shi, Y. Wang. Microstructure evolution of isotactic polypropylene during annealing: Effect of poly(ethylene oxide). Chinese J Polym Sci, 2012, 30: 199-208 (SCI)

  71. X.X. Li, H.Y. Wu, G. Yang, X.R. Liu, S.M. Hong, Y. Wang. Phase Transition in β-nucleated Isotactic Polypropylene Induced by Combination of Annealing and High Pressure. J. Macromol. Sci. B, 2012, 51: 2377-2391 (SCI)

  72. D.K. Xi, D.P. Zhang, J.J. Tian, J. Lu, Z.W. Zhou, C.S. Yuan, X.R. Liu, S.R. Long, Y.J. Huang, R. Huang. Spherulitic growth of poly (ether ether ketone) crystallized at high pressure. Journal of Macromolecular Science, Part B: Physics, 2012, 51(3): 510-524 (SCI, EI)

  73. D.K. Xi, W.J. Huang, Z.P. Li, J. Lu, X.L. Chen, Z.W. Zhou. Fullerene-induced novel spherulitic structures of poly (ether ether ketone) at high pressure. Materials Letters, 2012, 81: 189-192 (SCI, EI)

  74. Z.H. Huang, S.C. Hu, N. Zhang, X.L. Chen, D. Chen, Q. Jin, X. Jian.Effect of volume ratio of acetonitrile to water on the morphology and property of polypyrrole prepared by chemical oxidation method. Polymer Engineering & Science, 2012, 52(7): 1600-1605 (SCI)

  75. J. Dai, X. M. Fan, H. Liu, J. Wang, H. R. Liu, and F. Z. Zhang. Fabrication and High Visible Light Photocatalytic Properties of Cu/Cu2O Nanocomposites by the One-Pot Solution-Phase Hydrothermal Method. Journal of Nanoscience and Nanotechnology, 2012, 12: 6412-6419 (SCI)

  76. D.Z. Wu, X.M. Fan, K. Tian, J. Dai, H.R. Liu. Fabrication and photocatalytic properties of Cu2S/T-ZnOw heterostructures via simple polyol process. Trans. Nonferrous Met. Soc. China, 2012, 22: 1620-1628 (SCI)

  77. J. Qin, X.L. Chen, J. Yu, T. Xie, Y.Z. Tian, Q. Lv, P. Xie. The structure and nonisothermal crystallization kinetics of HDPE nanocomposites filled with Mg2Al–LDH. Polymers and Polymer Composites, 2012, 20(8): 665-674 (SCI)

  78. Z.F. Shi, Y.J. Wang, C. Du, N. Huang, L. Wang, C. Y. Ning. Silicon nitride films for the protective functional coating: Blood compatibility and biomechanical property study. Journal of the Mechanical Behavior of Biomedical Materials, 2012, 16: 9-20 (SCI)

  79. Z.L. Yang, Q.F. Tu, Y. Zhu, R.F. Luo, X. Li, Y.C. Xie, M.F. Maitz, J. Wang, N. Huang. Mussel-inspired Coating of Polydopamine Directs Endothelial and Smooth Muscle Cell Fate for Re-endothelialization of Vascular Devices. Advanced Healthcare Materials, 2012, 1: 548-559

  80. L.L. Wu, G.J. Wan, F. Zhou, J. Yang, N. Huang. Finite Element Analysis of a Mechanical Heart Valve in Assembly. Advanced Materials Research, 2012, 569: 487-490 (EI)

  81. F. Zhou, Y.Y Cui, L.L. Wu, Y. Chen, J. Yang, N. Huang. TRIZ Based Tool Management Applied in Mechanical Heart Valve Engineering Systems. Advanced Materials Research, 2012, 569: 521-524 (EI)黄楠

  82. Q. Jiang, R. Yang, F.Y. Cao, P. Li, P. Pu, Z.W. He, Y. Zhao. Effects of the catalyst embedded conditions on the electrochemical properties of the grown in situ carbon nanotube chemically modified electrode. Procedia Engineering, 2012, 27: 1399-1404 ( EI )

  83. R. Yang, Q. Jiang, F.Y. Cao, L.B. Ren, Y.J. Hu, Q. Ma, Y. Zhao. Effects of the carbon nanotube length on its chemically modified electrodeelectrochemical performances, Procedia Engineering. 2012, 27: 1405-1410 ( EI )

  84. Q. Jiang, G.G. Fu, D.Y. Xie, S.Q. Jiang, Z.L. Chen, B. Huang, Y. Zhao. Preparation of carbon nanotube/polyaniline nanofiberbyelectrospinning. Procedia Engineering, 2012, 27: 72-76 ( EI )

  85. Y. Zhang, C.H. Cheng, X.S. Yang, C. Ke, Y. Zhao. Superconductivity and ferromagnetism in Mn-doped La0.84PrSr0.16CuO4 and Mn-doped LaPr0.88Ce0.12CuO4. Physics Procedia, 2012, 27: 36-39 ( EI )

  86. X.S. Yang, L.Q. Yang, C.H. Cheng, L. Lv, Y. Zhao. Magnetoresistance, electroresistance and nonlinear electrical behavior in nanopolycrystalline La2/3Sr1/3MnO3. Physics Procedia, 2012, 27: 96-99 ( EI )

  87. L.Q. Yang, X.S. Yang, C.H. Cheng, L. Lv, Y. Zhao. Structure and electrical properties in polymer bonded La0.7Sr0.3MnO3 composites. Physics Procedia, 2012, 27: 92-95 ( EI )赵勇

  88. J. Lu, R. Huang. Selective etching of pressure-crystallized bisphenol-A polycarbonate by dimethylacetamide at room temperature. Advanced Materials Research, 2012, 430-432: 66-69 (EI)

国内杂志论文

  1. 谢槟, 李贵才, 代璐, 杨苹. 黄楠,基于多巴胺自聚合及肝素固定改善钛的血液相容性. 高等学校化学学报, 2012, 33(1): 90-95 (SCI)

  2. 姜丽丽, 鲁雄. 石墨烯在太阳能电池中的应用. 无机材料学报, 2012, 27(11): 1129-1137,2012 (SCI)

  3. 王蓉, 史占花, 蔡芳共, 杨峰, 贾永芳, 黎颖, 程翠华, 赵勇. ZnO/Cu2O异质结中深能级表面光伏特性研究. 高等学校化学学报, 2012, 33(4): 768-771 (SCI)

  4. 廖鑫, 杨峰, 蒲明华, 赵勇. PbS量子点/ZnO纳米片复合膜的制备及其光电化学性能研究. 无机材料学报, 2012, 27(1): 59-63 (SCI)

  5. 史占花, 王蓉, 杨峰, 贾永芳, 黎颖, 程翠华, 赵勇. 钛箔上生长-Fe2O3纳米氧化膜及其光电性质研究. 无机化学学报, 2012, 28(7): 1338-1342 (SCI)

  6. 吴德智, 范希梅, 代佳, 刘花蓉, 刘红, 张冯章. 硫化亚铜/四针状氧化锌晶须纳米复合材料的制备及其光催化性能. 催化学报, 2012, 33(5): 802-807 (SCI)

  7. 陈晓浪, 徐阳, 孙志丹, 张志斌, 胡书春. Shaw Ling Hsu. 拉伸温度对α′-型聚乳酸结构与性能的影响. 化学学报, 2012, 70(6): 775-782 ( SCI)

  8. 谢东, 冷永祥, 黄楠. 表征高分子材料表面力学性能的新概念—“表面积/面积比”. 高分子材料科学与工程, 2012, 27(7): 167-170 (EI)

  9. 刘艳秋, 黄楠, 邹远文, 黄学进, 李晋川, 樊瑜波. 一种血管生物反应器相关参数的量化分析. 西南交通大学学报, 2012, 47(1): 139-143 (EI)

  10. 胡珂, 刘涛, 刘诗卉, 陈俊英, 黄楠. 钛材料表面固定多聚赖氨酸-肝素纳米颗粒以改善血液相容性的研究, 功能材料, 2012, 43(19), 2685-2693 (EI)

  11. 张慧婷, 周超, 罗丽萍, 李遂焰, 陈俊英, 孙鸿, 黄楠. 利用MicroBCA和QCM对钛薄膜表面固定的纤连蛋白进行量化研究与对比. 功能材料, 2012, 43(13): 1726-1729 (EI)

  12. 张琨, 邓坤, 李敬安, 王雪, 陈俊英, 黄楠. Ti表面构建IV型胶原/肝素生物层提高细胞相容性的研究. 功能材料, 2012, 43(24): 3368-3376 (EI)

  13. 袁江, 谭红梅, 郭洪燕, 徐立, 汪建新. N-琥珀酰壳聚糖/氧化硫酸软骨素水凝胶的制，Chemical Propellants & Polymeric Materials, 2012, 10 (6): 66-69 ( )

  14. 闫浩然，汪建新，张俊良, 微波加热剥离法制备石墨烯, Chemical Propellants & Polymeric Materials, 2012, 10 (3), 47-519 ( )

  15. 黎恢永, 汪建新, 王少伟, 吴培作. 界面法制备纳米结构 ZnO薄膜. 纳米科技, 2012, 9(2): 31-37 ( )

  16. 闫浩然, 汪建新, 李辉, 陈迪. 溶胶-凝胶微波辅助水热处理合成纳米TiO2. 纳米科技, 2012, 9(1): 30-34 ( )

  17. 谭红梅, 刘 霞, 汪建新, 王莹莹. 一锅溶剂热法合成 SnO2纳米球和纳米颗粒. 纳米科技, 2012, 9(2): 38-43 ( )

  18. 姜丽丽, 鲁雄. 石墨烯制备方法及研究进展.功能材料, 2012, 23(9): 3185-3189 ( EI )

  19. 罗锦洁, 冯波, 郭振永, 范兴平, 屈树新. 钛表面不同厚度氧化钛纳米管层的摩擦磨损行为. 中国表面工程. 2012, 25(4), 94-99 ---翁杰

  20. 黄涛, 闫勇, 黄稳, 张艳霞, 晏传鹏, 刘连, 张勇, 赵勇, 余洲. 直流溅射工艺参数对Mo薄膜结构及电性能的影响. 功能材料, 2012, 4: 499-503 (EI)

  21. 黄稳, 余洲, 刘连, 张勇, 黄涛, 闫勇, 赵勇. 射频溅射工艺参数对AZO薄膜结构和性能的影响. 功能材料, 2012, 12: 1553-1555 (EI)

  22. 黄稳, 余洲, 张勇, 刘连, 黄涛, 闫勇, 赵勇. AZO薄膜制备工艺及其性能研究. 材料导报, 2012, 26: 35-39 ( )

  23. 闫勇, 张艳霞, 李莎莎, 晏传鹏, 刘连, 张勇, 赵勇, 余洲. 非晶CIGS前驱膜无硒退火的相变历程. 功能材料, 2012, 43: 2902-2905 (EI)

  24. 张欣, 王文涛, 张敏, 张勇, 张酣, 雷鸣, 赵勇. 高分子辅助化学溶液沉积法制备高温超导涂层导体BaZrO3(BZO)缓冲层的研究. 功能材料, 2012, 14(43): 1854-1857 ( EI )

  25. 杨立芹, 羊新胜, 吕莉, 赵勇. 粘结型La0.8Sr0.2MnO3/Sn复合材料电输运与磁电阻特征. 磁性材料及器件, 2012, 4: 31-34 --赵勇

  26. 李炜, 蒋玉石, 庞强, 翟正绘, 周仲荣. 不同性别人体皮肤摩擦不舒适度感知功能的研究. 摩擦学学报, 2012, 32(3): 227-232 (EI)

  27. 翟正绘, 李炜, 庞强. 去角质化妆品对皮肤摩擦性能的影响研究. 摩擦学学报, 2012，32(6): 606-611 (EI)

  28. 朱俊廷, 孟繁臣, 周祚万. 在轴对称径向Coulomb势场中单电子Schröding方程的解析解. 四川大学学报(自然科学版), 2012, 49(6): 1280-1284 (EI)

  29. 朱俊廷, 古公兵, 周祚万. 常压水热法制备纳米多界面结构氧化锌及其电磁波损耗特性. 功能材料, 2012, 6(43): 813-816 (EI)

  30. 朱俊廷, 简贤, 王定川, 周祚万. 螺旋碳纤维的顺磁响应. 材料导报, 2012, 26(8): 17-19

  31. 张楠, 陈海路, 胡书春, 仇迎, 金佥, 黄真浩, 田馨, 刘欢. 化学镀镍碳纳米管的电磁学性能与吸波性能研究. 化工新型材料, 2012, 40(5): 81-83

  32. 徐阳, 孙志丹, 陈晓浪, 郭刚，张志斌, 胡书春. 结晶温度对左旋聚乳酸的晶体改性和晶体形貌的影响. 功能材料, 2012, 43(16): 2138-2140 (EI)

西南交通大学材料先进技术教育部重点实验室

首页

联系

栏目类别